2.5 DM
This is a dyno chart of a some of the work
that we performed on a DM racer. The car came to us with putting
out 196 HP to the wheels. Not bad for a lightened car with close
ratio gearing a diet of several hundred pounds. But, after the
addition of a higher pressure fuel pressure regulator and the GIAC/DSR
touch, we squeezed out an easy 209 @ the wheels which is almost exactly
what the standard E36 M3 puts out on our dyno (rated at 240). So,
we found in additional 15+ HP at the wheels and 8+ ft-lbs over a very
large range. Notice how the A/F ratio looks great. DSR feel
that this system is good for up to 230 HP at the wheels are
approximately 260-265 crank HP!
e-mail
dc@dynospotracing.com
